Tin assay results for hole
A2-006 have not een received. The
hole was designed to test Anomaly A2, 200 metres
along strike to the west from discovery hole A2-001. The 507.1 metre
hole was drilled to the north on an inclination of 60 degrees.
Significant polymetallic
vein style mineralisation was intersected in the basement from its
commencement below the overlying sediments at 136.0 metres
to the end of the hole. The entire 371.1 metre
basement section was found to contain;
0.41% zinc, 9.7 g/t silver, 0.041% lead and 0.07% tin
With tin results included, significant
intersections from hole A2-006 are now as follows;
1.0m (215.0 to 216.0m) at 1.09% zinc, 53 g/t
silver, 0.1% lead and 0.32% tin
1.0m (269.0 to 270.0m) at 1.60% zinc, 20 g/t
silver and 0.11% tin
3.0m (283.0 to 286.0m) at 1.77% zinc, 63 g/t
silver, 0.60% lead and 0.27% tin
10.0m (305.0 to 315.0m) at 2.30% zinc, 144
g/t silver, 0.89% lead and 0.41% tin
1.0m (320.0 to 321.0m) at 1.91% zinc, 32 g/t
silver and 0.14% tin
1.0m (349.0 to 350.0m) at 2.27% zinc, 16 g/t
silver and 1.59% tin
20.0m (418.0 to 438.0m) at 4.18% zinc, 49
g/t silver and 0.38% tin
including 2.0m (419.0 to 421.0m) at 11.77% zinc, 119 g/t silver and
0.72% tin and
including 2.0m (434.0 to 436.0m) at 19.70% zinc, 228 g/t silver and
0.93% tin
Drill hole locations - Anomaly A2 area
The intersections obtained in hole A2-006
indicate that the higher grades intersected in discovery hole A2-001
(11.0m at 6.33% zinc, 67 g/t silver, 0.34% tin and 5.05m at 8.00%
zinc, 180 g/t silver and 0.58% tin) extend for at least 200m to the
west. The anomalous levels of tin are interpreted to indicate the
mineralisation has a granitic association. Assays are awaited from
the other holes to determine the extent of the higher grade zones.
|