ENDEAVOUR SIGNIFICANTLY EXTENDS
HIGH GRADE MINERALIZATION AT FETEKRO
View News Release in PDF
FETEKRO EXPLORATION HIGHLIGHTS:
- In line with Endeavour's objective of discovering a standalone greenfield project, exploration resumed on Fetekro in 2017
- With nearly 32,000 meters drilled on the property during 2017-2018, focused primarily on the highly prospective Lafigu� target, Fetekro is to date Endeavour's most advanced greenfield exploration property
- Lafigu� target highlights:
- A large mineralized vein system was defined over an area 2.5km long by 0.6km wide, remaining open at depth and towards the southeast
- Notable selected intercepts include: 7.97g/t Au over 26.9m, 25.90g/t Au over 10.9m, and 13.21g/t Au over 7.6m
- A maiden resource is expected to be published in Q4-2018 and a follow-up drill program is scheduled to start in Q4-2018
- The preliminary assessment of the recently completed gold-in-soil geochemical campaign indicates the occurrence of additional targets located in proximity to Lafigu�, where a drill program has been scheduled for 2019
Abidjan, September 24, 2018 - Endeavour Mining (TSX:EDV)(OTCQX:EDVMF) is pleased announce positive drill results for the Fetekro greenfield exploration property, located in north-central C�te d'Ivoire approximately 500km from Abidjan.
Endeavour began exploration on the Fetekro property in March 2017, following a strategic assessment of its exploration tenements which ranked the property as a top priority target. Since then, a total of 312 Reverse Circulation ("RC") and Diamond Drilling ("DD") holes have been drilled, amounting to nearly 32,000 meters. Drilling mainly focused on the highly prospective Lafigu� target where a large mineralized vein system was defined over an area 2.5km long by 0.6km wide, remaining open at depth and towards the east. All available data is being interpreted and a maiden resource estimate is expected to be published in Q4-2018 and a follow-up drilling program is scheduled to start in Q4-2018.
In addition, a gold-in-soil geochemical campaign was recently completed. Its preliminary assessment indicates the occurrence of additionnal targets located in proximity to Lafigu�, where a drill program has been scheduled for 2019.
Patrick Bouisset, Executive Vice-President Exploration and Growth stated: "We are pleased to continue to deliver against our two key objectives from our 5-year exploration strategy outlined in 2016. Following the significant near-mine exploration success already achieved, in line with our first objective of extending mine lives, we are now excited to report the results from Fetekro, which is our most advanced greenfield exploration property.
The Lafigu� target, located within the Fetekro property, has been the primary focus of our recent greenfield exploration program. The discovery of extensive mineralization over such a large area, coupled with the identification of nearby prospects, is very encouraging. We are eager to publish a maiden resource later this year, which may bring us one step closer to achieving our second key objective within our 5-year exploration program - that of discovering of a standalone greenfield project in West Africa."
ABOUT THE FETEKRO PROPERTY
The Fetekro property corresponds to the PR 329 exploration license which covers approximately 247 square kilometers located in north-central C�te d'Ivoire, nearly 500km from Abidjan, as shown in Figure 1 below. Fetekro is located in the northern end of the Oum�-Fetekro greenstone belt which extends over 300km in a north/northeast direction within the Proterozoic Birimian series of central C�te d'Ivoire. This greenstone belt is composed primarily of volcano-sediments, consisting mainly of mafic to intermediate metavolcanics, felsic metavolcanics and clastic meta-sediments, that are bound and intruded by granitoid complexes. Known gold deposits such as Bonikro and Agbaou are hosted within the same belt.
Endeavour is the operator of the licence in joint-venture with Soci�t� pour le D�veloppement Minier de la C�te d'Ivoire ("SODEMI").
Historical drilling between 1998 and 2014 was sporadic, comprised of 1,803 meters of Reverse Air Blast ("RAB") drilled over 94 holes, 8,577 meters of Reverse Circulation ("RC") drilled over 134 shallow holes and 4,165 meters of Diamond Drilling ("DD") drilled over 52 holes.
Exploration was aggressively relaunched in March 2017, following the full reinterpretation of the historical data. Drilling mainly focused on the highly prospective Lafigu� target, as shown in Figure 1 below, where a large mineralized vein system was defined over an area 2.5km long by 0.6km wide, while additionnal targets were identified through the preliminary assessment of the recently completed gold-in-soil geochemical campaign.
Figure 1: Simplified map of the Fetekro property showing the Lafigu� prospect
ABOUT THE LAFIGU� TARGET - MAIN DISCOVERY TO-DATE AT FETEKRO
As shown in Figure 2, three main mineralized zones have been identified at the Lafigu� target (Lafigu� South, Center, and North), with Lafigu� Center and North remaining open at depth and towards the southeast.
Figure 2: Lafigu� discovery and selected intercepts per area (True width uncapped)
Some selected best intersects from historical and Endeavour drilled holes include (true width uncapped):
- D1297: 13.59m @ 7.33 g/t Au
- R0897 : 26.85 @ 7.97 g/t Au, (including 0.86m @ 17.55 g/t Au; 0.86m @ 33.20 g/t Au, 0.86m @ 25.60 g/t Au, 0.86m @ 13.25 g/t Au, 0.86m @ 83.65 g/t Au, 0.86m @ 10.98 g/t Au)
- R0797 : 16.45m @ 5.32 g/t Au, (including 0.86m @ 33.50 g/t Au, 0.86m @ 11.45 g/t Au, 0.86m @ 10.16 g/t Au)
- D0597B : 19.66m @ 3.71 g/t Au, (including 0.49m @ 26.20 g/t Au)
- LFDH02-15: 4.20m @ 15.60 g/t Au, and 7.00m @ 6.35 g/t Au, (including 1.15m @ 32.00 g/t Au)
- LFRC02-40 : 5.00m @ 7.88 g/t Au, (including 1.00m @ 19.30 g/t Au) and 12.00m @ 2.90 g/t Au, (including 1.00m @ 16.86 g/t Au)
- LFDD10-27 : 7.62m @ 13 .21 g/t Au, (including 0.60m @ 117.50 g/t Au)
- LF17-112 : 6.34m @ 5.48 g/t Au, (including 0.91m @ 17.50 g/t Au) and 15.41m @ 2.95 g/t Au, (including 0.91m @ 10.73 g/t Au)
- LF17-131 : 7.25m @ 4.15 g/t Au, (including 0.91m @ 10.41 g/t Au)
- LFDD17-243 : 5.38m @ 2.16 g/t Au and 5.70m @ 4.56 g/t Au, (including 0.65m @ 27.02 g/t Au)
- LFDD17-244 : 21.70m @ 5..13 g/t Au, (including 1.05m @ 20.39 g/t Au, 1.45m @ 35.13 g/t Au)
- LFDD18-402: 8.36m @ 2.91 g/t Au
- LFRC18-365 : 5.98m @ 5.19 g/t Au, (including 1.00m @ 26.78 g/t Au)
- LFRC18-373 : 12.95m @ 2..29 g/t Au, (including 1.00m @ 12.59 g/t Au) and 2.99m @ 2.63 g/t Au
- LFDD18-410 : 7.17 m @ 39.69 g/t Au (including 0.8 @ 12.73 g/t Au, 1.2m @ 70.77 g/t Au, 1.25m @ 15.49 g/t Au, 0.80m @ 186.50 g/t Au) and 10.86m @ 25.90 g/t Au, (including 1.30m @ 71.40 g/t Au, 1.34m @ 94.30 g/t Au, 1.39m @ 35.30 g/tAu)
- LFRC18-385: 22.91m @ 2.86 g/t Au and 2.99m @ 3.34 g/t Au
Drill hole intercepts are calculated using a minimum down-hole length of 2 meters, a cutoff grade of 0.5 g/t Au, an internal dilution length of 1m and a missing interval grade of 0 g/t Au.
The Lafigu� prospect is hosted by an east-northeast trending reverse faulting zone, which is locally bounded by two northeast-trending steep oblique-reverse shear corridors subparallel to the main Birimian structural grain. The lens-shaped mineralization of Lafigu� appears to be hosted within a network of stacked and mineralized brittle-ductile reverse shear zones, dipping 20�-30� to the south-southeast. They developed mostly within the hanging-wall of a possible "basal thrust" which is either located at the contact between a mafic volcanics sequence and a mafic intrusive (as shown in the Lafigu� Center cross-section in Figure 3 below) or between a mafic intrusive and a felsic intrusive (as shown in the Lafigu� North cross-section in Figure 3 below).
This "basal thrust" strikes northeast to north-northeast and dips gently to the south (about 30�S). Regional schistosity varies in strike from north-south to North 070� with gentle to intermediate/steep dips to the east and south (25�-65�).
Figure 3: Lafigu� Center Cross-Section
Figure 4: Lafigu� North Cross-Section
The shear zones appear to be better developed at, or near, lithological contact zones, where competency contrasts do favor the occurrence of brittle-ductile shearing, permeability increases and enhanced hydrothermal fluids flow. The typical high-grade mineralization is associated with Qz-Cb-To veins and related Bt-To-Ser alteration zones (tourmalinization of the host rock when alteration is intense) hosted by the gently south-dipping brittle-ductile shear zones. Visible gold can be observed in such veins.
To date all preliminary test work results indicate a high gravity recoverable gold content and easy gravity tails leach with low final residues. In this preliminary test work, total gold recovery has been higher than 95%.
Preliminary assessments of the recently performed gold in soil geochemistry indicates the occurrence of other nearby anomalies close by Lafigu�. Once finalized, this analysis will help provide additional targets to be tested on PR 329 during 2019.
OTHER NEARBY TARGETS OUTLINED
As shown in the figure 5 below, the preliminary assessment of the recently performed gold in soil geochemistry indicates the occurrence of other nearby anomalies close by Lafigu�. Some of these targets are expected to be drilled in 2019.
Figure 5: Gold in soil geochemistry
NEXT STEPS
-
All available data on the Lafigu� target is being interpreted and a maiden resource estimate is expected to be published during Q4 2018.
-
A follow-up drill program is scheduled to start in Q4-2018 and to be pursued in 2019 on Lafigu� prospect and nearby identified targets.
QUALIFIED PERSONS
The scientific and technical content of this news release has been reviewed, verified and compiled by G�rard de Hert, EurGeol, Senior VP West Africa Exploration for Endeavour Mining. G�rard de Hert has more than 20 years of mineral exploration and mining experience and is a "Qualified Person" as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101"). The 2017-2018 program is operated under the field direction of Silvia Bottero, Professional Natural Scientist and "Qualified Person" as defined by National Instrument 43-101.
ASSAYS AND QUALITY ASSURANCE/QUALITY CONTROL / DRILLING AND ASSAY PROCEDURES
The Reverse Circulation drill program samples were collected on a 1-meter interval using dual tube, a percussion hammer and drop centre bit. The material passes through a cyclone which is thoroughly cleaned after every sample by flushing the hole. Samples were split at the drill site using a 3-tier riffle splitter with both bulk and laboratory sample weights and moisture recorded. Representative samples for each interval were collected with a spear, sieved into chip trays and retained for reference.
Drill core (PQ, HQ and NQ size) samples are selected by LMCI geologists and sawn in half with a diamond blade at the project site. Half of the core is retained at the site for reference purposes. Sample intervals are generally 1 meter in length.
All samples are transported by road to Bureau Veritas (BV) in Abidjan (C�te d'Ivoire). Each laboratory sample is secured in poly-woven bags ensuring that there is a clear record of the chain of custody. On arrival samples are weighed and crushed to 2mm (70% passing), pulverize entire sample to 75 micrometers (85% passing). Samples are analyzed for gold using standard fire assay technique with a 50-gram charge and an Atomic Absorption (AA) finish. Blanks, field duplicates and certified reference material (CRM's) are inserted by LMCI geologists in the sample sequence for quality control and to ensure there are a suite of QC samples in each fire assay batch.
The sampling and assaying at Lafigu� is monitored through the implementation of a quality assurance - quality control (QA-QC) program. This QA-QC program was audited by International mining consultant in 2017 and consequently designed to follow industry best practices.
CONTACT INFORMATION
Martino De Ciccio
VP - Strategy & Investor Relations +44 203 640 8665 mdeciccio@endeavourmining.com |
Brunswick Group LLP in London
Carole Cable, Partner +44 7974 982 458 ccable@brunswickgroup.com |
ABOUT ENDEAVOUR MINING CORPORATION
Endeavour Mining is a TSX listed intermediate African gold producer with a solid track record of operational excellence, project development and exploration in the highly prospective Birimian greenstone belt in West Africa. Endeavour is focused on offering both near-term and long-term growth opportunities with its project pipeline and its exploration strategy, while generating immediate cash flow from its operations.
Endeavour operates 5 mines across C�te d'Ivoire (Agbaou and Ity), Burkina Faso (Hound�, Karma), and Mali (Tabakoto) which are expected to produce 670-720koz in 2018 at an AISC of $840-890/oz. Endeavour's high-quality development projects (recently commissioned Hound�, Ity CIL and Kalana) have the combined potential to deliver an additional 600koz per year at an AISC well below $700/oz between 2018 and 2020. In addition, its exploration program aims to discover 10-15Moz of gold between 2017 and 2021 which represents more than twice the reserve depletion during the period.
For more information, please visit www.endeavourmining.com.
Corporate Office: 5 Young St, Kensington, London W8 5EH, UK
This news release contains "forward-looking statements" including but not limited to, statements with respect to Endeavour's plans and operating performance, the estimation of mineral reserves and resources, the timing and amount of estimated future production, costs of future production, future capital expenditures, and the success of exploration activities. Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "expects", "expected", "budgeted", "forecasts", and "anticipates". Forward-looking statements, while based on management's best estimates and assumptions, are subject to risks and uncertainties that may cause actual results to be materially different from those expressed or implied by such forward-looking statements, including but not limited to: risks related to the successful integration of acquisitions; risks related to international operations; risks related to general economic conditions and credit availability, actual results of current exploration activities, unanticipated reclamation expenses; changes in project parameters as plans continue to be refined; fluctuations in prices of metals including gold; fluctuations in foreign currency exchange rates, increases in market prices of mining consumables, possible variations in ore reserves, grade or recovery rates; failure of plant, equipment or processes to operate as anticipated; accidents, labour disputes, title disputes, claims and limitations on insurance coverage and other risks of the mining industry; delays in the completion of development or construction activities, changes in national and local government regulation of mining operations, tax rules and regulations, and political and economic developments in countries in which Endeavour operates. Although Endeavour has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. Please refer to Endeavour's most recent Annual Information Form filed under its profile at www.sedar.com for further information respecting the risks affecting Endeavour and its business. AISC, all-in sustaining costs at the mine level, cash costs, operating EBITDA, all-in sustaining margin, free cash flow, net free cash flow, free cash flow per share, net debt, and adjusted earnings are non-GAAP financial performance measures with no standard meaning under IFRS, further discussed in the section Non-GAAP Measures in the most recently filed Management Discussion and Analysis.
View appendix